Display shows "Waiting for Connection":
Ensure power supply is firmly connected
Display indicates there is a signal loss:
Check all connections
Connect the signal source directly to the display device to ensure there is a
signal output. Change the signal source if necessary.
Degraded video signal:
Check cable lengths between the TX to the switch, the switch to RX
Ensure the connection between each level is within required ranges
Press the RESET button on the TX/RX front panel, reset and reconnect
Troubleshooting:
Connection:
Connect HDMI input with HDMI output of source device
Connect IR blaster extension cable to the IR extender out port
Connect RJ45 port with RJ45 input port of HDMI extender RX
Connect HDMI output of HDMI extender RX to HDMI input of HDTV and set the
source input to the correct HDMI input channel
1.
2.
3.
4.
Installation:
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Cat6 Network Cable - follow the IEEE-568B wiring standard:
1.
2.
3.
4.
5.
6.
7.
