Operation Controls and Functions:
Command Code
Function Description
Example
Feedback
Default Setting
Power
s power z!
Power on/off the device, z=0~1 (z=0
power off, z=1 power on)
s power 1!
Power on
System Initializing...
Initialization Finished!
FW version x.xx.xx
power on
r power!
Get current power state
r power!
power on/power off
s reboot!
Reboot the device
s reboot!
Reboot...
System Initializing...
Initilization Finished!
FW version x.xx.xx
System Setup
help!
list all commands
help!
r status!
Get device current status
r status!
Get the unit all status: power, in/out
connection, EDID mode
r fw version!
Get firmware version
r fw version!
MCU Boot: Vx.xx.xx
MCU APP: Vx.xx.xx
r link in!
Get the connection status of the input
port
r link in!
HDMI in: connect
r link out y!
Get the connection status of the y
output port, y=0~5 (0=all, 1~4=HDBT
1~4,5=loop out)
r link out 1!
HDMI loop out: connect
HDBT output 1: connect
s reset!
Reset to factory defaults
s reset!
Reset to factory defaults
System Initializing...
Initialization Finished!
FW version x.xx.xx
Output Setting
s HDMI stream z!
Set HDMI loop output stream on/off
z=0~1 (0:disable, 1:enable)
s HDMI stream 1 !
Enable HDMI loop out stream
Disable HDMI loop out stream
enable
s HDMI hdcp z!
Set HDMI loop output HDCP on/off
z=0~1 (0:disable, 1:enable)
s HDMI HDCP 1!
Enable HDMI loop out HDCP
Disable HDMI loop out HDCP
enable
s HDBT y HDCP z!
Set HDBT output y HDCP on/off,
y=0~4 (0=all) z=0~1 (0:disable,
1:enable)
s HDBT 1 HDCP 1 !
s HDBT 0 HDCP 1 !
Enable HDBT output 1 HDCP
Disable HDBT output 1 HDCP
Enable HDBT all outputs HDCP
Disable HDBT all outputs HDCP
enable
ASCII Commands:
ASCII Commands
Serial port protocol. Baud rate: 115200 | Data bits: 8bit | Stop bits:1 | Check bit: 0
x - Parameter
y - Parameter 2
! - Delimiter
