Ocean Matrix OMX-DA10XL, Инструкция по эксплуатации

Страница: 7 / 8

Using the OMX-DA10XL Video Audio Distribution Amplifier
5
5. On the first and second
OMX-DA10XL
units, release the Term button.
On the third
OMX-DA10XL
unit, push in the Term button to terminate
the line to 75
Ω
.
6. On each
OMX-DA10XL
unit:
•
Connect the power cord to the mains electricity
•
Release the BAL/ST buttons to select unbalanced stereo audio operation
•
Adjust
1
the video trimmer controls
2
for output signal level and/or cable
compensation equalization level, if required
•
If audio control adjustment is required for left and/or right gain, push in
the Enable/Disable buttons, and then adjust
1
the trimmer controls
Figure 2: Increasing the Outputs: Arranging a 1:30 Video Audio DA
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 The video outputs are arranged in two blocks of 5 outputs (outputs 1 to 5, and outputs 6 to 10). Each block can be separately
trimmed for output level and cable equalization (EQ.) thus achieving different compensations for different cable lengths