Ocean Insight OCEAN SR2, Инструкция по установке и эксплуатации

Страница: 20 / 32

MNL-1029 Rev A
12
Specification OCEAN SR2
Power-up Time 3s
Connectors USB Type-C, SMA, 16 pin Samtec TFM
USB Type-C Ratings: V
CC
Minimum 4.40V, Nominal 5V, Maximum 5.25V
IO Standard 3.3V CMOS
Absolute Maximum Ratings:
Voltage on any pin (other than input
power) 5V
Interface USB 2.0 High Speed
External Triggering Jitter 10 ns
Mechanical
Input Fiber Connector SMA 905
Physical Dimensions 88.9 mm x 63.5 mm x 31.9 mm
Weight 275g
Environmental
Temperature:
Storage
Operation -30 to 70°C
0 to 55°C
Humidity 0-85% non-condensing
1
Dynamic range for a single acquisition is a measure of the ratio of full signal to noise.
2
Dynamic range of the system is the range of the detectable light level and can be thought of as the maximum detectable light level at
the minimum integration time divided by the minimum detectable light level at the maximum integration time.
3 Scan rate is dependent on factors external to the spectrometer. This figure was obtained using OmniDriver and OceanDirect APIs.