It will ask you if you want to Enable the
<Check Network when Power
on>
, it is suggested to choose
<Yes>
. Then the radio will always check
the available WiFi network automatically.
Connecting to your WiFi Network
The screen below will appear. You can choose
<Yes>
to proceed to
search for the available WiFi network. If your router has the WPS
function, you can select
<Yes(WPS)>
to proceed.
It will then start scanning the network. After the search is done, it will
display a list of the available router.
Choose your router from the list, enter the WEP (Wired Equivalent
Privacy) or WPA(Wi-Fi Protected Access) code. If your network is not
encrypted with the WEP or a WPA code, the unit will connect to the router
automatically.
Note: The encryption code would have been set up by the person
who set up and configured your network.
Please follow the steps below to enter the encryption code of your router.
- Rotate the rotary knob to browse the character
- Press the
Ú
right
button to skip to the next entry
- After you finish with the entries, press the Rotary knob to confirm.
The radio will start connecting to the network.
After the router is connected successfully, it will display the main menu as
follow:
01:01
Would you like to
configure Network now?
Yes(WPS) NO
Yes
01
:
4 4
Linksys
Homeaudio
Demo
MOVE
INPUT
:
OK
Ent er
Password
1
/
1
16
:
23
‒ 4 ‒
