Getting started
Connect the AC adaptor supplied in the package to the DC jack at the rear
side of the radio.
The radio is an adaptor and does not have internal speaker. Prepare
a powered speaker which has the 3.5mm pin to plug in to the 3.5 mm
line out jack on the radio.
The radio supports also the optical connection. If you have a system
comes with optical input, connect to the optical out on the radio to
listen.
Switch the radio on using the Power on/off switch. The radio will power up
and the display on the front will light up and display as follow:
Select YES to start the wizard, select No to set up manually. If you select
YES
, it will start setting the date and time by choosing the 12 or 24 hour
format, update the time from Network (this option is recommended) or
you can set the time manually by selecting
No Update
.
It will then prompt you to set the time zone, select the time zone in your
country, then select
Daylight Saving
is applicable and whether you want
to keep network connected:
WELCOME
- 4 -
