- 5 -
Step #5
continued
#4:
Stand the ladder upright.
Attach the Swing Ladder assembly
by flexing the oval openings over
the two round tabs on the Platform.
#3:
Position the remaining Fixed
Ladder Tread so that the tabs align
with the notches at the bottom of
the Side Rail assemblies and tap in
with the rubber mallet until the tread
is properly seated. NOTE: The small
groove should face the inside of the
ladder.
#5:
Using the
rubber mallet tap
down to secure.
#2:
Using two #10 x 3/4” self-
tapping screws, connect the Hand-
rails together by using one screw
on the outside and one screw on
the inside. Repeat for the remaining
handrail.
