Troubleshooting (continued)
Here are the things to look for:
For all keyboard models:
!
make sure that you have the MIDI cables connected to the correct jacks. Even if you connect
the cables backwards, the DB-1 may still be able to run off MIDI power, so don’t be fooled by
this – make sure DB-1 MAIN OUT goes to Nord MIDI IN, and Nord MIDI OUT goes to DB-
1 MAIN IN.
For all keyboard models with USB MIDI:
!
make sure that the Nord is configured to use the DIN MIDI interface and not USB. For
example, on Electro 4 menu function
MIDI Interface
the default setting
U (USB MIDI)
must be changed to
P (DIN MIDI)
For Electro and Electro 2:
!
make sure that the MIDI channel is set to
1-16
, and not “
—
“ (off).
For Electro 3:
!
make sure the MIDI channel is set to
1-16
, and not
OF
!
make sure Control Change (CC) Mode is set to
Sr
(Send and Receive).
!
make sure Program Change Mode is set to
Sr
(Send and Receive).
For Stage 2:
!
double-check the MIDI menu settings described in the Stage 2 section of this manual
For Stage and Stage EX:
!
make sure the MIDI Panel A/B Channel is set to
1-16
, and not
Off
!
make sure the MIDI Organ A/B Channel is set to
1-16
, and not
Off
!
make sure MIDI Control Change Mode is set to
Send & Receive
!
make sure MIDI Prog Change Mode is set to
Send & Receive
18
