Ocean Aire OWC1211, Инструкция по инженерии, установке и обслуживанию

Страница: 16 / 32

14
OCEANAIRE DELUXE ELECTRONIC CONTROLLER
When power is connected, the controller will display “888” momentarily, and then
disappear. Press the POWER button, then press the TEMP SELECT button until the SET
POINT is displayed. Adjust the SET POINT to the desired temperature, and the unit will
cool as required.
The systems controls temperature /- 2°
POWER
—Turns the unit on/off when power is supplied
MODE
- Selects the mode of operation between Cool and Moisture Control.
COOL
- The system will operate in cooling mode only.
MOISTURE CONTROL
- The system operates in the cooling mode to reduce
humidity within the conditioned space.
Every 4 hours, the fan is started, circulating the air, and the air temperature is recorded by
the controller. The cooling cycle is started for one hour, or until the room temperature
drops 2°, which ever comes first. This cycle repeats every four hours.
DELUXE ELECTRONIC CONTROLLER
The OWC controller is equipped with many features for a more precise level of cooling
and operation. Additionally, the controller can be removed from the unit and installed for
remote operation when using an extended display cable. Also, with the addition of a
remote sensor, the controller can operate away from the unit while sensing temperatures
in another space or in ductwork, overriding the inside temperature sensing bulb on the
bottom of the thermostat— accessory parts may be required.
POWER
button
INSIDE TEMPERATURE SENSOR