Ocean Aire AIR BOSS PAC12, Инструкция по инженерии, установке и обслуживанию

Страница: 12 / 32

10
ACCESSORIES
CEILING PANEL DUCT KIT
A ceiling panel kit is available for discharging the
condenser air above a drop ceiling. The ceiling
panel duct kits are furnished with a white vinyl
coated flexible duct that allows for convenient
installation. A 2ft X 2ft ceiling duct- panel is
included to replace a 2ft X 2ft drop-ceiling panel
where the connection is desired.
The
CK-12
is available for PAC12, 18, and 24.
The ceiling panel kit consists of 8 feet of flexible
duct, a 2' X 2' lay in ceiling panel and a 12 inch
duct flange that attaches to the condenser air
discharge opening on the top of the unit. The
CK-16
(for 3 and 5-ton units) consists of a
ceiling duct-panel, and a 16 inch flexible duct.
Note
—Drop ceiling spaces should be
vented or large enough to handle the warm
condenser air. Check local codes to assure
compliance
.
If longer runs of duct are required, table below
lists maximum duct run with no bends. For every
90° elbow, subtract 6 feet from the run.
Ceiling
Kit
Model
Flexible Duct
Diameter X
Length
Fits
PAC12
Fits
PAC18
Fits
PAC24
Fits
PAC36
Fits
PAC60
CK-12 12 inch X 8 feet    No No
CK-16 16 Inch X 8 feet
No
No No  
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)
Maximum Equivalent
Feet (approx)
(ESP)
2 x 2 CEILING
DUCT-PANEL
VINYL COATED
FABRIC DUCT
DUCT FLANGE
DUCT STRAP
DUCT FLANGE
The optional duct flange allows for round flexible ducting to be
attached to the PAC condenser discharge.
DF-12
(12-inch diameter) fits all units except the 3 ton/5 ton. The
DF-16
(16 inch diameter) fits the 3 ton model PAC36,
and 5 ton Model PAC60.
NOTE: PAC36 and PAC60 units come with
duct flange installed
.