Ocean Aire 2OAC Series, Инструкция по инженерии, установке и обслуживанию

Страница: 12 / 36

ACCESSORIES
CEILING PANEL DUCT KIT
A ceiling panel kit is available for discharging the
condenser air above a drop ceiling. The ceiling
panel duct kits are furnished with a white vinyl
coated flexible duct that allows for convenient
installation. A 2ft X 2ft ceiling duct - panel is
included to replace a 2ft X 2ft drop - ceiling panel
where the connection is desired.
The
CK - 12
is available for 2OAC12, 18, and
24. The ceiling panel kit consists of 8 feet of
flexible duct, a 2' X 2' lay in ceiling panel and a
12 inch duct flange that attaches to the
condenser air discharge opening on the top of
the unit. The
CK - 16
(for 3 and 5 - ton units)
consists of a ceiling duct - panel, and a 16 inch
flexible duct.
Note
—Drop ceiling spaces should be
vented or large enough to handle the warm
condenser air. Check local codes to assure
compliance .
If longer runs of duct are required, table below
lists maximum duct run with no bends. For every
90° elbow, subtract 6 feet from the run.
Ceiling
Kit
Model
Flexible Duct
Diameter X
Length
Fits
2OAC12
Fits
2OAC18
Fits
2OAC24
Fits
2OAC36
Fits
2OAC60
CK - 12 12 inch X 8 feet ✓ ✓ ✓ No No
CK - 16 16 Inch X 8 feet
No
No No ✓ ✓
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)
Maximum Equivalent
Feet (approx)
(ESP)
2 x 2 CEILING
DUCT - PANEL
VINYL COATED
FABRIC DUCT
DUCT FLANGE
DUCT STRAP
DUCT FLANGE
The optional duct flange allows for round flexible ducting to be
attached to the 2OAC condenser discharge.
DF - 12
(12 - inch diameter) fits all units except the 3 ton/5 ton. The
DF - 16
(16 inch diameter) fits the 3 ton model 2OAC36,
and 5 ton Model 2OAC60.
NOTE: 2OAC36 and 2OAC60 units come with
duct flange installed .
10