Oce VarioPrint 6000 Ultra Line, Руководство пользователя

Страница: 51 / 88

Clean the OPC belt (left)
Introduction
This procedure is only intended for key operators who received the special maintenance
training.
When to do
When each 7th print contains a pollution at exact the same location.
Before you begin
Make sure that you have the Cleaner P and the offset pads at hand.
Required tool
■
Service key (supplied with the machine)
■
Socket wrench 10 (supplied with the machine)
■
Heat-resistant gloves (supplied with the machine)
Open the doors
1.
Use socket wrench 10 to loosen the bolt of the front doors (1).
2. Open the front doors (2).
1
2
[70] Open the front doors
Unlock the OPC unit
1.
Use the service key to push and turn L1 counter-clockwise.
Chapter 3 - Maintenance tasks - Level 2 51
Clean the OPC belt (left)