Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 114 / 174

114 Océ VarioPrint 2050-70 Job manual
Digital document section
[77] The Page size card of the Digital document section
[77] The Page size card of the Digital document section
Note:
You can enter the Key Operator mode when you open the 'Special
settings' card in the 'Digital document' section. The Key Operator mode is
protected and requires a password entry.
Card Description of the function
'Image
quality' To improve the image quality, you can do the following tasks
(see ‘
Improve the image quality of the digital document ’ on
page 124 ).
■
Select 'Photo', when the originals contain extensive photos.
■
Select 'Text', when the originals are mainly text.
■
Use the 'Lighter or darker' option, to change the brightness of
the images.
'Page
size'
■
The 'Automatic' value is the default setting in the 'Selection'
function box.
The value changes to 'Manual' when you select a different size.
■
The selected 'Page size' for the digital document matches the
information scanned by the automatic document feeder.
The platen does not detect the dimensions of the originals, so the
default size setting does not change.
Make sure that the orientation of the selected page size matches
the feed direction of the originals (see ‘
Prepare the scan job ’ on
page 107 ).
■
The 'Automatic' value is the default setting in the 'Enlargement
or reduction' function box.
The Océ VarioPrint 2050-70 calculates the ratio, according to
your settings, when you use the automatic document feeder.
Adjust the 'Enlargement or reduction' manually if you need an
enlarged or reduced digital document with the glass platen (see
‘
Make an enlarged or reduced digital document ’ on page 121 ).