Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 107 / 174

The scan function 107
Prepare the scan job
Introduction
To prepare the scan job, you must first inspect your originals. The originals are
different sizes and types, sort the set of originals into separate job parts. Each
job part requires a different setting profile. The Combine key allows you to
create one assembled scan job from the separate job parts.
The Océ VarioPrint 2050-70 has two input locations for your originals, the
automatic document feeder and the platen.
Standard originals
A standard original represents:
■
A standard size (A3, A4 or A5).
■
A standard weight (60 -170 g/m
2
).
Non-standard originals
A non-standard original represents:
■
A page of a book.
■
A curled or damaged original.
■
A non-standard size (not A3, A4 or A5).
■
A non-standard weight (less than 60 g/m
2
or more than 170 g/m
2
).
Job parts
When the set of originals has more than one original type, make separate job
parts. Then, enter the settings for each job part.
Split the set of originals in separate job parts, when the set of originals
contains:
■
One or more non-standard originals.
■
More than 50 A4, 50 A5 or 35 A3 originals.
■
Different document types.
■
Different paper sizes.