Oce PlotWave 750, Руководство по безопасности

Страница: 14 / 21

20
ENERGY STAR® (All countries)
• Océ has joined the ENERGY STAR® program of the United States Environmental Protection
Agency (EPA). The purpose of the ENERGY STAR® program is to promote the manufacturing
and marketing of energy-efficient equipment, thereby potentially reducing combustion-related
pollution. Using the energy management features outlined below prevents unnecessary power
consumption, which helps to prevent air pollution from electricity generating plants and saves
money on your utility bills. As an ENERGY STAR® Partner, Océ has determined that the
PlotWave 750 meets the ENERGY STAR® criteria for energy efficiency laid down in the
ENERGY STAR® Program Requirements for Imaging Equipment (Version 1.2).
Energy consumption (All countries)
• The energy consumption of Imaging Equipment can be determined using the TEC procedure.
This procedure was developed under the supervision of the United States Environmental
Protection Agency. TEC stands for Typical Electricity Consumption. The TEC value of a product
represents the energy consumed in a week under standardized conditions. The TEC value for
thePlotWave 750 is listed in the Product Safety Data Sheet.
• In order to limit energy consumption during times of non-use, the PlotWave 750 has a sleep
mode during which the power level is reduced. The value for the Sleep mode is listed in the
Product Safety Data Sheet.
• Power Modes and Delay Times
The energy consumption and efficiency are influenced both by the product technology and by
the settings chosen by the user, especially the delay times that are selected to enter reduced
power states. The following delay times have been pre-set.
Operational mode Default Delay Time [minutes]
Sleep mode 30 minutes (range 5 - 240 minutes)
The modes above are automatically entered after the Default Delay Time has elapsed; counting
from the moment the last print has been produced. These settings are recommended and for
most users ensure both ease of use and low energy consumption. Between brackets are the
minimum and maximum values. The Delay Times can be changed. Shorter delay times will
reduce energy consumption even further, but may cause longer recovery times. In some cases
longer delay times may prove to be more convenient, but it should be noted that this may
cause an increase in energy consumption. Therefore, from an energy preservation point-of-
view, longer delay times are not recommended.
Regulation notices
14 Chapter 2 - Regulation notices