Oce fx2081, Руководство по установке

Страница: 14 / 28

Installation Manual
Step 7 : Turn the power on
1
Turn the power on.
The markings are international standards: [ | ] means on, [ ] means off.
2
Perform Step 8 “Turn off the transport mode” first (see next page). Once
the transport mode has been turned off, you may procedure to the next
procedure.
3
The “Server Initializing” message will appear on the display.
Please wait a few minutes until it disappears.
NOTE
If a DHCP (Dynamic Host Configuration Protocol) server is not
installed on your network or if you are not installing the machine on
a network, the message will read “DHCP server did not respond“.
You will need to turn off the DHCP server manually as described in
“If your network is not using DHCP” on page 17.