Oce FS-520, Руководство пользователя, Страница: 47 / 48

Finisher adjustment (FS-520) outlines 4
FS-520 4-3
4 Finisher adjustment (FS-520) outlines
Use this function to make the following the fine adjustments on Finisher
FS-520. For details, see CS650 User manual.
!
Detail
The target adjustment items vary depending upon the configuration of
installed options.
03 Punch Adjustment/01 Vertical Position Adj.
% Perform this adjustment for the center position of punch holes
operated by the Punch Kit PK-512/PK-513.
03 Punch Adjustment/02 Horizontal Position Adj,
% Perform this adjustment for the position of punch holes in the feeding
direction operated by the Punch Kit PK-512/PK-513.
03 Punch Adjustment/03 Registration Adjustment
% Perform this adjustment for the skew of the punch position made by
the Punch Kit PK-512/PK-513 in duplex copying or cover sheet feeding
using the paper inserter.
03 Punch Adjustment/04 Paper Edge Detect Sensor Adj.
% Perform this adjustment to detect the paper edge to be used as
reference point of punching operation.
06 Paper Inserter Tray Size Adj.
% Perform the size adjustment for the Upper tray and Lower tray of the
Paper Inserter PI-502.
07 Output Quantity Limit
% Specify the output quantity limit of stapled sets.
08 Curl Adjustment
% This adjustment can be used to adjust the compression fixing amount
of paper exit decurler roller if any crease appears in printed sheets
output from FS-520.