background image

1-20

Special Features

Special Features

Printheads

Printheads

 — variable drop size, piezoelectric printheads, 

192 jets per head.

Ink System

Off-Head System (OHS)

 — 1-liter bulk ink boxes with inte-

grated filters. No-drip quick connectors simplify ink box 
replacement.

Onboard vacuum/pressure (VP) system 

— provides vac-

uum to maintain negative printhead pressure, and air pres-
sure to purge the printheads or ink tubes without removing 
them from the printer.

Patent-pending automated printhead service station

 — 

fully maintains the health of the printheads while idle or in 
service, without operator intervention.

Media Handling

Integrated media roller tables

 — integrated front and rear 

roller tables that fold up to feed rigid media sheets, or down 
to use the rollfed media supply. The tables extend outward 
from 36 to 60 inches (91.4 to 152.4 cm) to support board 
lengths up to 96 inches (244 cm).

Automatic head height

 — automatic head height adjust-

ment and patent-pending shuttered UV lamps allow the 
printer to accept rigid sheet-fed media up to 1.0 inch (25 
mm) thick.

Automatic media width sensing — 

automatically detects 

the width and position of the media loaded, for precise image 
placement.

Built-in static charge abatement

 — ionizer bars help dissi-

pate static electric charge from synthetic media, while the 
electrically-conductive platen discharges static build-up on 
the bottom surface of the media

AutoEdge

 — automatically aids the loading of rigid sheets 

by detecting the leading edge.

Rollfed media supply spool

 — accepts rollfed media up to 

54 inches (137.2 cm) wide on 3-inch cores.

Rollfed media edge holders

 — integrated clips hold down 

the edges of rollfed media to prevent curling.

Содержание CS7400 Series



























































































































Отзывы: