Oce ColorWave 810, Руководство по безопасности

Страница: 5 / 14

Power cord
WARNING
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other damage
to the power cord. The use of a damaged power cord (exposed core wire, broken wire, for
example) could result in a fire or breakdown. If you find any of these conditions, immediately
turn OFF the power switch and unplug the power cord from the power outlet. Then call your
authorized service representative.
• Do not use an extension lead to connect the machine.
• Do not use any power cable other than the one provided. Never use the power cable with
any other electrical device.
Power source
WARNING
• Put the power plug directly into a wall socket that has the same configuration as the plug.
The use of an adapter leads can result in an inadequate power supply. If a proper wall outlet
is not available, ask a qualified electrician to carry out the installation.
• Do not use a multiple outlet adapter or an extension lead. Contact your authorized service
representative if an extension lead is required. The use of an extension cord may result in fire
or electrical shock.
IMPORTANT
• Consult your authorized service representative before you connect other equipment to the
same wall outlet.
• Do not connect the machine to a mains voltage that differs from the value as stated on the
power marking label.
NOTE
• If connection to a different mains voltage is required, contact your authorized service
representative.
Power plug
WARNING
• For machines that are connected via a wall socket: Place the machine close to a wall socket
that is easily accessible. The power plug is intended to serve as a disconnect device.
Grounding
WARNING
• Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
• This equipment has not been designed for connection to an IT power system. An IT power
system is a voltage network in which the neutral wire is not connected to ground.
Safety information (all countries)
5