PHOTO 63.
Glue the brakes
100
onto the bars
101
at the distances indicated in the photo. Use cyanoacrylate adhesive.
PHOTO 64.
Now glue the brakes onto the beams. The brakes should be parallel with the wheels. Finally paint them black as
shown.
PHOTO 65.
Make up the bumper grills by gluing together the parts
102
,
103
,
104
and
105
, as shown. Use cyanoacrylate
adhesive, and then paint them burgundy red.
PHOTO 66.
Glue the stanchions
106
adjusted to the stairwell. Use cyanoacrylate adhesive.
PHOTO 67.
Insert a stanchion
107
into the hole in the platform and then glue on the parts
108
,
109
and
110
. Glue the
111
between the stanchions.
PHOTO 68.
Paint the outer side burgundy red and the inner side grey. Glue the stanchion
112
into place, making sure it is well
aligned with the stanchion on the top deck. Glue one of the parts
76
into place as shown in the photo.
PHOTO 69.
Glue the parts
113
,
115
and
116
onto the base
114
and paint black and gold as shown.
PHOTO 70.
Paint the supports
118
black and glue them to the fronts of the access platforms and then glue the control panel
into place.
PHOTOS 71 & 72.
Make two 1.5 mm diameter by 5 mm long holes into part
119
at the distances indicated in the photo and then
insert and fix the two parts
120
.
Fix the 24 stanchions
106
to the top deck and paint them gold. Pain the panel brown and fit the
lights
121
, the moulding
122
and the sign
123
. Fit and glue this to the top deck.
PHOTO 73.
Make up the steps using the parts
124, 125, 126
and
127
. Use white glue. Paint the sides black and the rest grey.
PHOTO 74.
Glue the steps to the platforms. Fit and glue the bars
128
and
129
using one of the parts
76
.
PHOTOS 75 & 76.
Paint the interior sides
130
and
131
, supported by the corresponding stanchions, grey. Likewise glue on the
exterior sides
132
. Soak the parts
131
and
132
so that they can be bent into shape easier. Paint the outer side cream.
Bend the
brass wire
133
to match the shape of the stairwell and curve the brass wire
134
, gluing them into place on the stanchions
above the side panels and at the ends. Also glue the straight sections
135
into place. Glue the netting
136
and
137
between the
bars.
PHOTOS 77 & 78.
Paint the bases of the top deck benches
138
and
139
brown. Using a pencil simulate planking, with a width
of 2 mm for each plank.
Glue the legs
140
to the bases and insert the supports
141
into the bases. Finally insert the backrests
142
and
143
into place. Insert the lengths of brass wire
144
and
145
to join the legs. Paint these parts burgundy red and brown
as shown in the photo.
PHOTO 79.
Once the benches have been assembled glue them into place in the slots provided to that end on the floor of the
top deck.
PHOTOS 80 & 81.
In the space next to the single-seater bench fit and glue the base of the trolley
146
, the column
147
and the
finishes
148
and
149
. Paint the column brown and ochre as shown.
Paint the lamp
150
metal colour and the bulb white. Glue
the glasses
151
onto both sides, as shown. Now glue the lamp onto the bar
152
, and the bar to part
76
on the floor part. Paint
the bar black.
PHOTO 82.
Paint the handle
153
burgundy red and glue it to the base. Make up and fix the stud
157
. Glue the decorations
154,
155
and
158
into place. Above the window glue the sign
22
and the light
121
. Glue and paint the handle
156
as shown. Glue the
lamp
159
, with its glass
160
.
Photo 83.
Fit the sides’ decoration
161
in place. Glue the poster
163
to the base
162
and then glue it in place on the side.
PHOTO 84.
Glue the trolley wheel
164
into place on the trolley
165
, along with the reinforcement
166
and the cable
167
. Paint
this a metal colour and glue this assembly to the base. Glue the decorations
168
into place as shown on the sides of the top
deck
169
along with the posters
170
, previously glued to their bases
171
. Finally glue the ledge
172
around the floor of the top
deck. Soak this strip well so that it will adapt to the curve, and finally paint it black.
We have designed this model with one single goal in mind: so that you will enjoy yourself while building a beautiful reproduction
of a magnificent scaled model. If we have achieved this, then our mission is complete.
Thank you.
OCCRE