Occhio Sento faro Series, Инструкция по монтажу

Страница: 44 / 68

10
Cut the mains cable to a length of 5 cm
and strip the insulation from the ends.
5 cm
230 V AC
mains cable
Sento LED faro up Installation
Place the mounting plate over the
power outlet and against the ceiling,
and turn it until the elongated holes are
aligned as required. Mark the positions
where the holes are to be drilled.
Check the routing of the power
cables.
Drill two 6 mm diameter holes, push in
the rawlplugs so that they lie flush and
screw on the mounting plate (screws
and rawlplugs are included in the scope
of delivery).
Ensure that the screws finish flush with
the mounting plate.
Connected separately
Connected with through-wiring