Occhio Sento faro flat, Инструкция по монтажу

Страница: 61 / 68

27
Phase 1 adjustment
Turn the adjusting toggle 90° clockwise.
The track adapter is now connected to
phase 1.
Phase 2 adjustment
(3-phase track adapter only)
Turn the adjusting toggle 90°
anticlockwise.
The track adapter is now connected to
phase 2.
Phase 3 adjustment
(3-phase track adapter only)
Pull out the adjusting toggle.
Turn it 90° anticlockwise.
The track adapter is now connected to
phase 3.
Push the cover back on so it is flush (it
is held in place by clips).
Remove the protective film from the
housing.
The body is now fully assembled.
To assemble the head: See "Assembling
the head".
Swivel the housing 90° to the left or
right as required.
Orientation: Parallel to the bus bar.
3 2
10
Sento faro track