32
3 Installation – electrification
Caution
Before fitting, disconnect all current-
carrying lines from the mains supply.
$
Length of the supplied lamp cable: 0.5m
Maximum length of lamp cable: 10m
Più LED spotlights are powered by a
standard 700 mA LED current source
(driver). The current source has a voltage
rating of 20V DC (typically 12-24V or 18-
24V or 18-36V).
Every Occhio Più LED spotlight is to be
operated on its own driver (correct polari-
ty must be observed). The spotlight must
not be set up in series and not in parallel.
Connect the ends of the cables for the
lamp cable to the LED driver as shown in
the diagram.
Correct polarity must be observed.
Black cable = plus terminal
Incorrect polarity can damage the LED.
PRI
SEC
Control
port
LED
+ –
230 V
Содержание Piu piano in LED
Страница 1: ...Pi piano LED Pi piano in LED Instructions...
Страница 55: ...55 MA_90971_Piu_piano_Piu_piano_in_LED_en...