OCB OCB-VT-013, Руководство пользователя, Страница: 7 / 31

- 7 -
4.4 Connecting and Installation
Read this manual before using your OCB-VT-013 and check if all parts are included in the packaging box.
4.4.1 Ensure that your OCB-VT-013 has a working SIM
installed.
- Check that the SIM has not run out of credit (test the SIM in a phone to make sure
it can send and receive SMS)
- Check that the SIM Lock code is turned off
- If you require the function of sending an SMS location report to the authorized
phone number when it makes a call to the OCB-VT-013, please make sure the SIM
installed supports displaying caller ID.
Before inserting SIM card, cut off the power for OCB-
VT-013. Install SIM Card
- Unscrew and remove the front cover of OCB-
VT-013.
- Insert the SIM card by sliding it into the card slot with the chip module facing to the
connectors on PCB.
- Put back the front cover and screw it up.
4.4.2 Antenna Connection
Connect the GSM Antenna to OCB-
VT-013. Connect the GPS Antenna to
OCB-VT-013.
- GPS antenna is used to receive satellite signals in the sky. It should be fixed to face
the sky (to be placed under the windscreen is recommended) and should not be
covered or shielded by any objects containing metal.
4.4.3 Find a suitable place inside the car for installing OCB-VT-013. Wiring
connections must be firm and reliable and the joints should be wrapped with
insulating tape tightly. The unused electrical wire should be properly insulated.
Check if all wirings have been connected correctly and then connect the AVL unit to
the motor power.
Check that the Red LED (Battery) is flashing 1 second on and 2 seconds off.
Make a missed phone call the OCB-VT-013 using a mobile phone to check if the
calling can go through and the OCB-VT-013 replies with an SMS indicating
longitude, latitude, speed
and date.
5. Change Password
Command : W******,001,######
Description : Change user’s password.
Note :
1. ****** is user’s password and the default password is 000000. The tracker will only accept commands
from a user with the correct password. Commands with wrong password will be ignored.
2. ###### is the new password. Password should be 6 digits.