- 10
-
On
One call is coming in / one call is being made
Flashing ( every 0.1 second)
The unit is being initialized
Flashing (0.1 second on and 2.9 seconds off)
OCB-GT-06 is connected to the GSM network
Flashing (1 second on and 2 seconds off)
OCB-GT-06 is not connected to the GSM network
Buttons
Power On/Off Button
Press and hold it for 3-5 seconds to turn on/off OCB-GT-06
SOS Button
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to receive an incoming call.
Press it to increase volume during conversation.
Call B
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to reject a call, cancel calling or complete a conversation.
Call C
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to decrease volume during conversation.
Other Connectors
Mini USB
Used for charging, firmware update and configuration on PC. (USB Data
Cable or USB-to-Serial Adaptor is required for firmware update and
configuration)
Lanyard Loop
For connecting lanyard.
4.4 First Use
Please read this manual before using your OCB-GT-06.
4.4.1 Ensure that your OCB-GT-06 has a working SIM
installed.
- Check that the SIM has not run out of credit (Test the SIM in a
phone to make sure it can send and receive SMS)
- Check that the SIM Lock code is turned off
- If you require the function of sending an SMS location report to
the authorized phone number when it makes a call to the OCB-
GT-06, please make sure the SIM installed supports displaying
caller ID.
4.4.2 Put the battery in OCB-GT-06 and charge the tracker for at
least 3 hours in power-off status using the wall charger or car
charger. Or you can connect the tracker directly to computer by
USB for charging. Red light is on during charging and is off when
charging is complete.
4.4.3 Press and hold the Power On/Off button for 3-5 seconds to
activate OCB-GT-06 and it will then enter standby mode. It is
suggested that you be in an outer place where it can receive better
GPS when you turn on the device.
