OCB 1000CW, Руководство пользователя

Страница: 12 / 31

13
3.5.
Alarm input and output
The device has 6 alarm input and 2 alarm output interfaces. Various state of alarm
level can be detected while the vehicle is in motion. Action`s such as braking, steering
horn etc. Below is a diagram that shows when the braking vane Is depressed, the MDVR
would be able to detect the high level, otherwise, just detect the low level.
+24V
Braking vane
Stoplight
Connect MDVR
sensor input cable
Alarm outputs are level output drive capability for the 200MA, if you want to drive
relatively large power device, must be external relay. Shown below is the Alarm output
photoelectric alarm wiring diagram.
MDVR ALM output
24V