Obvius AcquiSuite Ally 12, Инструкция по установке

Страница: 8 / 16

Revision C (12/18)
8
The following section illustrates the 12 channel model. The mounting components are slightly
different, but follow the same procedure.
STEP 1) Remove top cover screws (4x) and high voltage cover screws (2x) – provided
STEP 2) Locate, mark, and drill wall mounting points (2x – 6x — customer supplied)
The plastic enclosure itself can be used as a template for marking the drill locations on the
wall.
If the meter is not available for use as a drill template, a drawing indicating the spacing between
mounting holes can be found in the appendix. The centerline holes are intended for fastening
to wall studs. If hollow wall fasteners are used, the outer 4 mounting points are recommended.
#8 Fastener