background image

14

M E N U :   S Y S T E M

This menu contains all the settings to configure and manage the 

device

SUB MENU

OPTION / VALUES

DESCRIPTION

Device  Name

12 Character Label

Set a device name

Device ID

0-999

Set an optional device ID

Display

Display Timeout

Disable

Display stays on indefinitely

10s, 30s, 1m, 5m, 10m Display goes dark after this time

Screen Brightness

1-10

Adjust the brightness of the internal display

LED Brightness

0-10

Adjust the brightness of the front LEDs. Set to 0 to 

disable them.

Home Screen

Device Info

The display shows port and connectivity information

Cue Browser

The display shows a list of stored cues which can easily 

be browsed and started by the encoder wheel

ArtNet  Start

Universe 1

Universe 0

Universe 1 is sent to Art-Net 0-0

Universe 1 is sent to Art-Net 0-1

Lock Device

PIN: 000 (011)

Lock

Disable

The device does not require a pin

Timeout

The device asks for a pin after the display times out

Manual 

Lock: 

000 

(011)

Lock/Unlock Lock the device immediately

Wait for Data

No DMX is sent until valid data is received for the ports. 

The last incoming values continue to be sent on the ports 

until the time is expired. Once timeout has completed, 

the device will perform one of the below actions

Send 0

Signal Loss

Hold Last Look

Forever, 0s, 10s, 30s, 

1m, 5m, 10m, 60m

The last incoming values continue to be sent on the ports 

until the time is expired. Once timeout has completed the 

device will perform one of the below actions.

Fade to 0

0-60s (30s)

Crossfade to DMX 0. Set to 0s for instant out.

Disable DMX

DMX traffic is turned off on all ports

Backup  Config

Save Config

Config Saved

Save current configuration including all cue data

Load Config

Config Loaded

Reload configuration. Backups can be exported and 

imported from the web interface

RDM 

Pr

ocessing

All Disable

Disables RDM processing on the device

All Enable

Enables all RDM processing on the device

Factory Reset

Pin: 000 (011)

Confirm

Device will 

be reset 

to factory 

defaults. Yes/

No

Reset the device to factory default. It will reload NETRON 

Preset 1. All cues are deleted, and all settings are set to 

default. 

Pin: 000 (007)

Confirm

Device will be 

reset to User 

Preset 1. Yes/

No

Reset the device to User Preset 1.

Содержание NETRON EP2



























Отзывы: