3
www.observint.com
© 2019 Observint Technologies. All rights reserved.
6.
Make additional pan, tilt and/or rotation adjustments using the steps above if needed to perfect the
camera field of view.
7.
Tighten the clip plate screw to hold the turret in position.
8.
Reinstall the trim ring.
Specifications
Signal System
PAL / NTSC
Frame Rate
TVI / CVI / AHD: 8 MP @ 15 fps
CVBS: 960H “
Resolution
8 MP: 3840 (H) × 2160 (V)
Min. illumination
0.05 lux @ F1.2 (AGC ON), 0 Lux with IR ON
Shutter Time
1/15 s to 1/50,000 s
IR led
24 pcs
Lens
2.8 ~ 12 mm
Horizontal Field of View
105.94° (W) ~ 29.76° (T)
3-axis adjustment
Pan: 0 ~ 360°, tilt: 0 ~ 75°, rotate: 0 ~ 360°
Day & Night
IR cut filter
IR Cut Filter
Yes, 850 nm
Synchronization
Internal synchronization
D-WDR
Supported
Menu
AGC
Yes
Day/Night Mode
EXT / Auto / Color / BW (black and white)
White balance
Auto / Manual
BLC
Yes
S/N Ratio
38 dB
OSD
Supported
Interface
Video Output Termination
1 × BNC video output
Switch Button
TVI / AHD / CVI / CVBS
General
IP Rating
IP66 (waterproof)
Power Supply
12 Vdc
Power Consumption
5 W max.
IR Range
Up to 150 ft (45 m)
Communication
Up the coax, Protocol
Dimensions
Ø5.96 in × 4.54 mm (Ø151.4 × 115.2 mm)
Weight
1.5 lb (680 g) approx.
Cleaning
Clean the camera with an approved glass cleaning solution and a lint free cloth.
•
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub
the surface with a soft cloth moistened with a mild detergent solution, then rinse and dry it with a
soft cloth. Do not use benzene, thinner or other chemical products on the camera assembly; these
may dissolve the paint and promote damage of the surfaces.
•
Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing.
These may cause damage to the surface over time.
