15
Infrared Turret Camera User Manual
SECTION 3: AIMING THE CAMERA
SECTION 3
Aiming the Camera
1. Connect the video cable from the camera to a test monitor or to the BNC input on the
DVR.
2. Apply 12 Vdc power to the camera to power it on.
3. Unscrew the bezel until the camera module and housing can be rotated on the base.
4. While observing the video from the camera, adjust the camera to point it at your
surveillance target.
5. Position the housing to the LED array and the FOCUS and ZOOM adjusters (varifocal
models) are accessible
6. Screw the bezel onto the base tight enough to hold the camera assembly securely in
place.
7. If you are installing a CD601BVF / CD601WVF or CD700BVF / CD700WVF camera, use
a small blade screwdriver to adjust the focus and zoom if necessary.
