Observint Black BLK-HDC10IR Скачать руководство пользователя страница 3

iii

2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual

PRECAUTIONS

WARNING

 - Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING

 - Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

WARNING

 - This is a class A product. In a domestic environment this product may cause radio interference in which case the user 

may be required to take adequate measures.

WARNING

 - To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

CAUTION

 - Installation should be performed by a qualified service person and should conform to all local codes.

CAUTION

 - To avoid electrical shock, do not open the camera enclosure. Refer servicing to qualified personnel only.

CAUTION

 - Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by 

the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end use. 

Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with bushings.

DISPOSAL OF YOUR OLD APPLIANCES

1. 

All electrical and electronic products should be disposed of separately from the municipal waste stream via designated 
collection facilities appointed by the government or local authorities.

2. 

The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human 
health.

3. 

For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or 
the shop where you purchased the product. To disconnect power from the mains, pull out the mains cord plug. When install 
the product, ensure that the plug is easily accessible. 
 
 
 
 

Содержание Black BLK-HDC10IR
























Отзывы: