5
www.observint.com
© 2019 Observint Technologies. All rights reserved.
WHITE BALANCE: White balance, the white rendition function of the camera, is to adjust the color
temperature according to the environment. It can remove unrealistic color casts in the image. You can set
WHITE BALANCE mode as AUTO, or MANUAL.
AUTO: In AUTO mode, white balance is adjusted automatically according to the color temperature of
the scene illumination.
MANUAL: Use Manual to set the R-GAIN/B-GAIN value from 1 to 255 to adjust the shades of red/
blue color of the image.
BRIGHTNESS: Brightness refers to the brightness of the image. You can set the BRIGHTNESS value from 1
(darkest) to 9 (brightest).
CONTRAST: This feature enhances the difference in color and light between parts of an image. You can set
the CONTRAST value from 1 to 9.
SHARPNESS: Sharpness determines the amount of detail an imaging system can reproduce. You can set the
SHARPNESS value from 1 to 9.
SATURATION: Adjust this feature to change the color saturation. The value ranges from 1 to 9.
3 DNR (Digital Noise Reduction): Use 5DNR function to decrease the noise in the image, especially when
capturing moving images in poor light conditions, to produce a sharper image. You can set the 3 DNR value
from 1 to 9.
MIRROR: This feature is used to reflect the image. MIRROR can be set to OFF, H, V, and HV.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and vertically.
SMART LIGHT
Under the SMART LIGHT sub-menu, you can set the mode as AUTO or OFF.
AUTO: In AUTO mode, the white light turns on automatically as the environmental illumination
becomes dim.
THRESHOLD controls the sensitivity of the white light with the value ranging from 1 to 3. The
greater the value is, the more sensitive the white light is.
LEVEL controls the brightness of the white light. Values ranging from 1 to 5 (brightest).
OFF: OFF is the default mode.
FUNCTIONS
In the FUNCTIONS sub-menu, you can set the privacy mask, the motion detection, and DPC of the camera.
PRIVACY: Use the privacy mask to cover areas of the video to prevent them from being viewed and
recorded. You can configure up to 4 privacy areas (AREA 0 .. AREA 3).
Set the (Privacy) MODE to ON, and then select a PRIVACY area. Click up/down/left/right button to
define the position, and the size of the area.
MOTION: Use the MOTION menu to configure the camera to detect a moving object and then trigger an
alarm. Up to 4 motion detection areas can be configured.
DPC (Defective Pixel Correction): Defective pixels are pixels in a CMOS image sensor which fail to sense
light levels correctly. This camera supports defective pixel correction. You can set the DPC feature to ON or
OFF.
FACTORY DEFAULT
Click
Iris+
to enter the submenu, and click
OK
to reset all the settings to the factory default. Click
Cancel
to return to the menu without resetting the camera.
EXIT
Move the cursor to EXIT and click Iris+ to exit the menu without saving.
SAVE & EXIT
Move the cursor to
SAVE & EXIT
, and click
Iris+
to save the settings and exit the menu. If new settings are
not saved, they remain in effect only until the camera is powered off or reset.
Specifications
Camera
Image Sensor
2 MP CMOS image sensor
Resolution
1920
1080
Frame Rate
PAL: 1080p @ 25 fps
NTSC: 1080p @ 30 fps
Min. illumination
Color: 0.0005 lux @ (ƒ/1.0, AGC on), 0 lux with white light
Shutter Time
PAL: 1/25 s to 1/50,000 s
NTSC: 1/30 s to 1/50,000 s
Slow shutter
16
max.
Lens
3.6 mm with 83.6° horizontal field of view
Lens Mount
M16
Day & Night
Color
