Observer AWSC35, Руководство пользователя

Страница: 10 / 22

— 8 —
INSTALLATION
Installing the Camera(s)
u
If not mounting, but just using on a flat
surface (desk, table, etc.), skip to step 4.
v
Secure the multi-position camera bracket
to a stable surface, ceiling or wall using
the three screws. If needed, three
anchors are also included.
w
Loosen the T-Bolt on the Camera Bracket
and adjust viewing angle using the
Thumb Screw to rotate position.
x
BOTTOM/SURFACE MOUNT:
u
Align Mounting socket on bottom of
camera with T-Bolt and screw camera
onto the T-Bolt until it is in the desired
position.
v
Tighten the Brace against the camera to
secure it in place.
w
Set the desired camera angle and then
tighten the Thumb Screw.
CEILING MOUNT:
u
Remove the screw on the camera cover,
then align Mounting socket on top of
camera with T-Bolt and screw camera
onto it until it is in the desired position.
v
Tighten the Brace against the camera to
secure it in place.
w
Set the desired camera angle and then
tighten the Thumb Screw.
T-Bolt Thumb
Screw
T-Bolt Thumb
Screw
u
v
w
u
v
w