TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
For example:
If you want to setup a FTP Server on LAN host 192.168.1.33, you can configure a
virtual server rule as follows:
Step 1: Select “FTP” from
Usual Service Name
drop-down list.
Protocol
,
WAN Port
, and
LAN
Open Port
will be automatically filled, and you don’t need to change them.
Step 2: Select the
WAN Setting
for the service.
Step 3: Enter 192.168.1.33 in
LAN IP Address
field.
Step 4: Click
Apply Changes
button to save your configuration. And the Virtual Server will be
added to the
Current Virtual Server Forwarding Table
.
Step 5: Click
Save
button on the left panel to make sure your configuration can still take effect
after the Router reboots.
4.3.2.3 ALG
Choose “
Advanced
→
NAT
→
ALG
”, and then you can configure the ALG settings in the screen as
shown in Figure 4-28. The router supports several NAT ALG and pass-Through function. Here you
can enable or disable the ALG or pass-through function for each application.
Figure 4-28
Click the
Apply Changes
button to save your configuration.
)
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
47
