WWW.OBPLTD.COM
6. C
ALIBRATION
b. Set Min, Centre and Max Values from “Raw Data”
Min Value = Pedal In Rest Position
Centre Value = Calculated Travel Midpoint (Max+Min)/2.
Max Value = Pedal Full Travel
c. Click OK and repeat for each pedal axis.
d. NOTE: You may choose to set the values for the clutch pedal
over a smaller range than full travel to simulate the bite
point.
6. Close DIView
In Game Set-Up
1. Open Game
2. Select Inputs for Throttle, Brake and Clutch by depressing each
Individual Pedal. (
Please refer to specific game instruction
manuals for further information
).
