File: UT-5601
Copyright © - OBL Metering pumps - All rights reserved
25
Moreover, you can set the test
pressure (for test purposes only).
Moreover, you can set the motor
phase current (depending on the
power) so that the system can block
the pump once this current value is
exceeded (table 8:motor short-circuit
alarm). The system saves the date of
the last test performed.
NOTE: it is
good practice to calibrate the
pump every time process
conditions change (pressure,
manual adjustment value, etc.).
Pump capacity
MAXIMUM FLOW RATE
TEST VOLUME
ADJUSTMENT
TEST PRESSURE
DATE OF THE LAST TEST
PERFORMED
In this screen, you can enter the flow
rate or volume obtained during
calibration. The maximum flow rate
set will never be exceeded in the
operating modes. The adjustment
value is displayed in the operating
screen.
Priming
PRIMING TIME
Set the priming time and click start
to start the priming function. Press
stop to stop the priming function.
Languages
IT EN ES FR NL RU DE TU
Select language
Password
USER
ADMIN
Set the 4-digit password for each
user (it blocks the parameter setting
of the operating modes) or
administrator (it blocks the access to
settings).
DATE & CLOCK
DATE FORMAT (DD/MM/YY)
TIME FORMAT (24/12 H)
DATE
TIME
You can choose how you want to
display the date and time. These
data are added to the statistics
report.
UNIT OF
MEASUREMENT
Flow Rate L/h and Gal/h.
Even the volume measurement units
are updated accordingly.
PROXIMITY
Alarm activation with red display.
The proximity sensor (supplied)
verifies the correct operation of the
pump. The firmware stops the pump
if the number of strokes is equal to 0
