Objet Alaris30, Руководство пользователя

Страница: 103 / 142

DOC-24000 Rev. C
7–23
Objet30 User Guide
6. Place the mirror on the build tray.
7. Put on the gloves.
8. Soak the cleaning cloth with the cleaning fluid.
9. Clean the orifice plates, with a back ‐ and ‐ forth motion (see figure 7 ‐ 28).
Use the mirror to make sure that you have removed all of the residue
material.
Figure 7-28: Cleaning the heads
10. When you have finished cleaning, select the confirmation check box in
the wizard screen (see figure 7 ‐ 27) and click
Next
.
11. Remove the cleaning materials from the printer and close the cover.
12. Select the confirmation check boxes in the wizard screen and click
Next
.
The head ‐ purge cycle begins. When this is complete, the final wizard
screen appears.
Figure 7-29: Head cleaning wizard—final screen
13. Click
Done
to close the wizard.
WARNING: The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
It is recommended that you use this opportunity to also clean the roller and
the UV-lamp lens (to the right of the print heads).