Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH
M00500.0de-ID-B.DOC
Seite 34 von 52
3.6 Configuration of ID ZK.AB-A with external antenna ID ZK.ANT-A
After having connected the external antenna ID ZK.ANT-A to ID ZK.AB-A, the jumper X3 has to
be put on position „2-3“.
Due to this,
3. The external antenna is activated and
4. A small dummy antenna is to be found in ID ZK.AB-A , in order to facilitate the programming of
the identity cards (see chapter 3.7)
Jumper X3 configuration:
Internal antenna X3 => 1-2
external antenna X3 => 2-3
Illustration7: rear view of housing cover with inserted reading electronics
3 2 1
X3
EXT INT
