The times shown above are based on the ingredient thickness that is shown
in the table. Using a thicker or thinner piece will affect the cooking time of
the food. For example a steak or larger piece of beef 7 cm in diameter needs
to be cooked for at least 5 hours at the desired temperature. The maximum
thickness of a steak or larger piece of beef that should be cooked at a low
temperature is 7 cm in diameter.
Start cooking
1. When the desired temperature and time have been set, press the power/
start/pause button to start heating the water. Current water temperature
will be shown on the display during the heating process. In the timer display,
”----” will appear
2. Once the appliance reaches the set temperature, the appliance will beep 3
times to remind you to put the vacuum-packed food in the container. Note
that the display can show the set temperature before the appliance beeps,
but always wait until you hear the beep to be sure that the water has an
even temperature.
3. Place the vacuum bag(s) containing the food vertically in the batch rack
or place the bag directly in the receptacle/pan if you are cooking larger
ingredients. Always check that the water can circulate freely around the
bag(s). Make sure that the content of the bag(s) is fully under the surface
of the water. Cover the water surface with the accompanying sous vide
balls to create an insulating effect that helps maintain an even temperature
throughout the cooking process. The food is now cooked at the set
temperature and for the set time (the timer counts down per minute).
4. Press the power/start/pause button and the set cooking time will begin
to count down. Cooking is now done according to the set temperature and
time.
5. Cooking temperature and cooking time may change during the cooking.
Press the power/start/pause button, then repeat the instructions to change
temperature and/or time. Then press the same button again to resume
cooking.
6. To stop or pause cooking, press the power/start/pause button. To resume
cooking, press the same button again.
7. When the set time has passed, the appliance will beep 10 times and the
time flashes.
8. To turn off the appliance, press the power/start/pause button for 3
seconds, one beep will be heard and the display will turn off. If the
appliance is not switched off manually, the appliance will keep the process
running. The timer display shows how long has elapsed since the set time
was passed. The temperature display shows the current water temperature.
57
Содержание Sous Vide Pro+
