OBH Nordica BREEZE 16, Инструкция по использованию

Страница: 18 / 24

OBH Nordica cold-air fan
Before use
Before you use the fan you should read the instructions carefully and save
them for future use.
Parts of the appliance
1. Frontgrid
2. Propellerholder
3. Propeller
4. Locknut
5. Clips
6. Back grid
7. Motor shaft
8. Motor unit
9. Oscillating knob
10. Control panel
11. Screw
12. Stand
13. Height adjustment
14. Foot
Assemble
1. Remove the protection tube positioned on the motor shaft. This is only
added for protection during transport from supplier. Screw the stand
(12) onto the foot (14) with the 4 screws.
2. Assemble the control panel (10) onto the stand with the screw (11).
3. Assemble the back grid (6) onto the motor housing by screwing the
locknut clockwise (4).
4. Place the propeller (3) on the motor shaft by screwing the propeller
holder anti-clockwise (2).
5. Try to rotate the propeller with your hand. There should be no friction
between the propeller and the locknut. If the propeller doesn´t rotate
freely you have to dismount the appliance and start from step 1.
18.