10. Never immerse the appliance in water or any
other liquid. Never use the appliance with humid
hands and do not position the appliance on a wet
or humid surface.
11. Always unplug the appliance from the mains
supply immediately after use, if the appliance is
used in a bathroom, as water presents a hazard
even when the appliance has been switched off.
12. Always check the appliance, the cord and the
switch before use. If the cord is damaged, it must
be replaced by the manufacturer, an authorized
service agent or a similarly qualified person in
order to avoid any hazard.
13. Extra protection can be obtained by installation of
a residual current device of 30 mA. Check with
your installer.
14. The appliance is for domestic use only.
15. If the appliance is used for other purposes than
intended or not handled in accordance with
the instruction manual, the full responsibility for
any consequences will rest with the user. Any
damages of the product as a consequence of the
above are not covered by the warranty.
You are welcome to visit our website www.obhnordica.se for inspiration and
further information about our products.
Use
Plug to a wall outlet and switch on the appliance by pressing the on/off button
on the handle and the signal lamps start flashing. From the factory, the curler is
set at 120˚C; however, the temperature can easily be raised by means of the +
button on the handle. If you want to lower the temperature, press the - button.
The signal lamps flash to show the selected temperature. Put the curler on on
an even, heat-resistant surface during heating. The lamps will flash until the set
temperature has been reached, after which they will change to a constant light.
The curler is now ready for use.
The curler has five temperature settings; set the suitable temperature
depending on the type of hair:
20
21
