Cleaning
Unplug the appliance before cleaning and maintenance. Turn the switch to
“0” and unplug the appliance. Empty the footbath over the sink by pouring
the water through the spout under the splash guard. Dry the footbath with
a towel.
If oil and similar is left in the bottom, it can be wiped clean with a damp
cloth with some detergent. The footbath can never be immersed under
water or submerged in other liquids.
Safety instructions
1. Read through the instruction manual carefully before use and save it
for later.
2. Only connect the appliance to a 230V A.C. outlet and only use it for its
intended purpose.
3. Unplug the appliance after use.
4. Do not immerse the appliance in water or other liquids.
5. Electrical appliances are not toys and should therefore be kept away
from children’s reach. Make sure that the cord does not hang down
from the table.
6. Never leave the appliance unattended.
7. The footbath can only be used without water when using position 1 (vi-
brating massage), or when using the pedicure attachments. In position
2 and 3 the footbath must be filled with water.
8. Empty the footbath after use.
9. Always inspect the appliance, cord, and plug after use. If the cord is
damaged it can only be replaced by the maker, its service agent or a
licensed person in order to avoid danger.
10. As additional protection, the installation of a fault current protective
device (RCD with a release current of up to 30 mA) can be done.
11. The appliance is only private use.
12. The appliance can not be used professionally or medically, since the
appliance is not included in the CE directive concerning electro-medical
appliances.
13. If the appliance is used for other purposes than its intended, or is used
in violation of the instruction manual, no liability will be accepted. The
buyer is then responsible and the warranty will not cover those damages.
21
6048 Pedicure m trashbin 1205.indd 21
2006-02-15 11:12:24
