
NIRSIT EYE PC Introduction
16
2.6.2
PC1 to PC2
When two PCs are connected, one of both should provide marker information using e-prime
program, and the other should accumulate the data from NIRSIT device using NIRSIT EYE PC
tool program.
1
Click “
File explorer
>
Network
>
Properties
>
Change adapter settings
>
Ethernet
>
Properties
” in order.
2
Select the ‘Use the following IP address’ checkbox to activate and then input the IP address
to 192.168.1.3. and Sub netmask to 255.255.255.0.
3
Connect the two PCs with LAN cable.
4
Run the
NIRSIT EYE PC
tool and select the
Server IP Address
checkbox in the
Event
Connection Type
panel.
5
Select the
Serever IP Address
checkbox in
Event Connection
panel.
6
Click
Refresh
button to to check the IP then select the correct IP.
7
When
Open
button is clicked, NIRSIT EYE PC Tool is set to receive external sync data (1 -
255 number, 1 byte or String) from PC1. (PORT 60000)
Содержание NIRSIT
