OBDSTAR User Manual
5
2 PREPARATION
2.1 CHARGE THIS DEVICE
1. Connect the included USB cable with charger.
2. Plug the charger into AC outlet.
3. When it connects to charger, battery logo indicates
, it indicates that the battery is in charging
4. When battery logo changes into
, it indicates that the battery is fully charged and then disconnect
charger from AC outlet.
5. Unplug USB cable on the charger from this device.
2.2 USING BATTERY
● If the battery keeps unused for a long time or battery is completely discharged, it is
normal if it cannot be turned on while being charged. Please charge it for a period
and then turn it on.
● Using data service will cause more power consumption and shorten the stand by
time.
● The charging time of battery varies with temperature condition and battery
consumption status.
● While this device has low battery, a beep will sound. If it is very low, this device will
be switched off automatically.
Note: Do one of the followings to save power:
1. When this device keeps unattended, press POWER key to turn off the LCD.
2. Shorten the standby time: Enter main menu, choose “Settings” > “DEVICE”>
“Display” > “Sleep” to select a shorter standby time.
3. Decrease the brightness of LCD display: Enter main menu, choose “Settings” >
“DEVICE” > “Display” > “Brightness”, and then drag the slider to adjust it.
4. Change “Live wallpaper” into “Gallery”.
5. Set Bluetooth off: Enter main menu, choose “Settings” > “Wireless &Network” >
“Bluetooth”, and then toggle the switch to OFF.
6. Set Wi-Fi off: Enter main menu, choose “Settings” > “Wireless &
Network” >“Wi-Fi”, and then toggle the switch to OFF.
7. Press VOLUME key to decrease the volume.
http://www.uobdii.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html
