DD2050
1-37
The card provides 0-10 V or 0(4mA)-20 mA galvanically separated by an
analogue output ; the connection pinout is given in the following table:
Analogue current output:
Set the jumper J14 to position 2-3 for current output 4-20mA, on the pins :
11 (Current Out) and 9 (Current In)
Analogue voltage output:
Set the jumper J14 to position 1-2 for voltage output 0-10V on the pins :
12 Voltage Out and 8 (GND)
CAUTION
Technical characteristics:
Resolution= 10000 points
Precision = 0.05 % FS
Minimum voltage output load = 100 kohm
Minimum current output load = 250 ohm
