Section 3C: Installation
C: Mounting the frame to the wall
1. Place rubber gasket on top of the cooler so it is centered left/right
and against the wall.
15
2. Set the wall frame onto the gasket. Center it left/right and push it against
the wall and mark hole locations for wall fasteners. The gasket will set
the frame at the proper height.
Use mounting slots that
will provide the proper
securing location.
Make sure to pull
the plastic tubing
up through the hole
in the frame.
Rubber Gasket
3. Secure frame to the wall with fasteners (not provided). Pull plastic
tubing up through the hole in the frame.
Connects to the
solenoid valve
inlet.
