SF MEDIA FILTER INSTALLATION AND OPERATION MANUAL
oasisaquatics.com.au
15
PRO-ACTIVE MAINTENANCE PROGRAM
Like your motor vehicle it is important to maintain a regular service program for your pool
equipment to ensure the best operation and long lasting results.
The below chart provides a guideline to follow to best look after your valuable equipment.
Regular maintenance can identify any potential issues early and save on expensive maintenance
at a later date
WHEN?
WHAT ARE YOU LOOKING
FOR?
HOW CAN YOU FIX?
Weekly
Check Pressure Gauge
If pressure increases by5 PSI / 35
KPA, then BACKWASH and RINSE
the filter as per instructions.
Quarterly
Check all Gaskets & Pressure
Gauge
Isolate and turn off the Pump.
Remove all Gaskets and turn over.
You can also apply a silicon based
grease to extend the life. If dry,
then contact your local pool
professional to replace.
Check around the unit for
leaves/debris or signs of
flooding.
Replace any debris that is
restricting air circulation around
the Filter. If in a flood prone
location, rectify
Check for any Insects/Ants
etc
It is a good practice to use a good
quality surface spray around your
equipment. Make sure all units are
turned off and then spray around
all units to eliminate any
insect/ants etc
Check for any leaks
If you notice any water leaking
from the filter or other equipment.
Check gaskets first and reseal. If
continues, contact your local pool
professional to assess and rectify.
