Oase Underwater Power Supply 250, Руководство по эксплуатации

Страница: 6 / 16

- EN -
6
Technical data
Nominal input voltage (primary voltage)
1)
100-240V AC

10 %
Nominal input current (primary current intake)
1) max. 4.1 A
Nominal input frequency 50/60 Hz
Nominal output voltage (secondary voltage)
1)
25 V DC

3 %
Nominal output current (maximum secondary current)
1)
(per output)
max. 3.2 A
Rated capacity
1)
per output
max. 80 W (Class 2)
Rated capacity
1)
total
max. 240 W
Efficiency  92 %
Residual ripple 
1 % (U
pp

250 mV)
Starting current max. 15 A for 4 ms
Reset duration after triggering of the overload protection 5 minutes
Protection class IP 68
Isolation between the primary/secondary side galvanic
Maximum submersion depth 13.1 ft (4 m)
Length of power cable 20 ft (6 m)
Permissible water temperature
(operation in water, product active) 39 °F …95 °F
+ 4 °C …+ 35 °C
Permissible ambient temperature
(operation outside the water, product active) 14 °F …104 °F
- 10 °C …+ 40 °C
Storage temperature (product inactive = disconnected from the power
supply) - 4 °F …158 °F
- 20 °C …+ 70 °C
Standard UL 1310 / CSA C22.2 No. 223
Dimensions (length × width × height) 10.24 inch x 6.38 inch x 3.03 inch (260 mm × 162 mm × 77 mm)
Weight 10.6 lbs. (4.8 kg)
Article number 40289
1)
The values were determined after an operating time of 15 minutes and at an ambient temperature of 68 °F (+ 20 °C)
OASE connection cable
The maximum admissible current of the connection cable depends on the length of the cable.
Type Length (Order No.) Conductor cross section Maximum admissible current
Connection cable
24 V DC/01 3.28 ft (1 m) (12762)
9.84 ft (3 m) (12552)
24.60 ft (7.5 m) (12375)
49.21 ft (15 m) (11740)
0.078 × 0.098 inch²
2 × 2.5 mm²
Output voltage 10 A 7.5 A

5 A
Max. cable length 49.21 ft
15 m
65.61 ft
20 m
98.42 ft
30 m
Symbols on the unit
Read the instructions for use.
Protect from direct sun radiation.
Dust-tight. Watertight to a depth of 13.1 ft (4 m).