Oase PondJet Eco, Пусконаладка, Страница: 16 / 140

16
Assembling the vacuum cleaner
The unit must be completely assembled before it can be placed in the pond. Individual assembly
steps:
•
Fitting the nozzle body
•
Fitting the pump
•
Fitting the nozzle
Fitting the nozzle body
How to proceed:
 B
1. Insert the nozzle body into the float.
2. Insert the screws with washers through the holes in the nozzle body.
–
Ensure that the screws protrude from the bottom of the float.
3. Screw the self-locking nuts with washers onto the screws and tighten.
–
Only tighten the screws until the nozzle body is fixed without play (do not overtighten).
Fitting the pump
How to proceed:
 C
1. Screw the reduction element onto the pump outlet up to the stop.
2. Screw the pump and reduction element with flat seal onto the inlet of the nozzle body and
hand tighten.
3. Align the pump.
–
The filter basket of the pump must be centrally aligned to the counterweight.
–
Do not turn the pump too far in order to avoid damage.
–
Turn the pump back, if necessary, to the previous recess.
4. Screw the stud bolts into the two threaded holes on the right and left next to the pump and
tighten.
–
Select the centre of the three threaded holes on both sides.
5. Screw the nuts as far as possible onto the stud bolts.
–
The nuts serve as a support for the retaining brace.
6. Fit the retaining brace.
 D
7. Insert the Allen screws through the base of the pump and through the retaining brace, screw
on the nuts together with tooth lock washer and tighten.
8. Turn the nuts on the stud bolts up as far as the retaining brace.
–
Ensure that the retaining brace fixes the pump in place without tension.
9. Screw the nuts with washer onto the stud bolts and tighten.