Oase Lunaqua Maxi LED, Руководство по эксплуатации

Страница: 11 / 24

11
- GB -
Changing the lens (G)
Attention! Dangerous electrical voltage.
Possible consequences:
Death or severe injury.
Protective measures:
Prior to reaching into the water, disconnect the power supply to all units used in the water.
Disconnect the power plug prior to carrying out work on the unit.
Each lamp is fitted with a 30° lens. The lens can be replaced by a 10° lens (part of the scope of delivery).
How to proceed:
Hold the lamp at its foot (15). Do not hold at the end cap (16), as it would unscrew.
Hold the front cap (19) using a leather or textile cloth (to enhance the grip!) and unscrew counter-clockwise.
Slightly tap to remove the protection disk (18) and the lens (17) from the lamp.
Replace the lens, then reassemble the unit in the reverse order.
Cleaning
Attention! Dangerous electrical voltage.
Possible consequences:
Death or severe injury.
Protective measures:
Prior to reaching into the water, disconnect the power supply to all units used in the water.
Disconnect the power plug prior to carrying out work on the unit.
If necessary, clean the unit with clear water using a soft brush.
Ensure that no moisture can enter the unit.
Malfunctions
Malfunction Cause Remedy
Lamp does not light up Power supply interrupted Check power supply
Light intensity decreases Lamp glass soiled Clean
Repair
Neither the power pack nor the LED spotlight can be repaired in the event of damage to the cables or the housing and
have to be replaced. For your own safety, consult a qualified electrician or your specialist dealer if you have questions
or encounter problems!
Storage
Clean the unit and check for damage. Store at a place inaccessible to children.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.